5. System Setup and Operation
How to Zoom the Image
How to Zoom the Image
Image vertical and horizontal zoom, the effect can stretch the image
according to one direction.
Push [MENU] button, and enter the menu item, rotate the knob and choose
[INPUT SETUP], push the knob to confirm and choose <ZOOM>, push the
knob to confirm, settings are as follows:
V UP: Enlarge the image from the bottom.
V DOWN: Enlarge the image from the top.
V UP/DOWN: Enlarge the image to the top and the bottom.
H LEFT: Enlarge the image from the right.
H RIGHT: Enlarge the image from the left.
H LEFT/RIGHT: Enlarge the image to the left and the right.
CENTER: Enlarge the image from the center.
RESET: If quality image distorts by mistake in improper operation, it can be
initialized operation to recover factory setting.
VSP 5360
—>V UP
V DOWM
V UP/DOWN
H LEFT
H RIGHT
H LEFT/RIGHT
CENTER
RESET
Note
The [Crop/Zoom] button can also fulfill this setting.
User Manual
0
0
0
0
0
0
0
54