RGBlink VSP 5360 User Manual page 45

4. Menu Orientation
MENU
DVI MODE: Can select HDMI agreement or DVI; by default is DVI output,
When need HDMI signal output, choose HDMI.
DATE RANGE: DVI1 out range adjustment can choose RGB or YCBCR;
among them the RGB adjusting range is between 0-255, YCBCR adjusting
range from 16 to 235.
DE ADJUST: DE adjust, the sub-menu as following:
DE ON/OFF: Can choose to open or close, when choose open, it can be
adjusted to DE, as follows:
H SIZE: Width setting.
V SIZE: Height setting.
H Pos: Horizontal phase setting.
V Pos: Vertical phase setting.
When the signal source of the screen appear black side, can use this
function adjustment, make the image to full screen display.
RESET: If quality image distorts by mistake in improper operation, it can be
initialized operation to recover factory setting.
DVI2: The operations are the same with DVI1.
TEST PATTERN, including program out TP and preview out TP.
DSK SETUP: DSK function, settings as follows:
DSK: Can select ―ON‖ or ―OFF‖, OFF is the default state.
PRESET: Can preset value of the following functions, and total 13 modes:
User: User mode.
WhOnBk1: White On Black 1.
WhOnBk2: White On Black 2.
BkOnWh1: Black On White 1.
BkOnWh2: Black On White 2.
GrnOnBk1: Green On Black 1.
GrnOnBk2: Green On Black 2.
GrnOnWh1: Green On White 1.
VSP 5360 User Manual 45