5. System Setup and Operation
How to Realize Single Image Switching
How to Realize Single Image Switching
Boot the system default CV1 to the current input source (key flashes), if
need seamless switching other source such as DVI1, direct push DVI1 key,
OLED screen display as follows:
INPUT PROGRAM: DVI1
Choose DVI1 buttons, CV1button is off, and DVI1 key lights, single image
switching (that is switch CV1 to DVI1) is finished. The same method for
CV2, CV3, VGA1, VGA2, DVI1, DVI2, DVI3, DP1, DP2, SDI1 input signal
switching.
VSP 5360
User Manual
51