Table of Contents
Advertisement
C.
Software Upgrade
IP Software Download Instruction
Turn off the power, take the two coding switch to ―ON‖ state as below:
Connect one side of the RJ11 download line to the RS232 on the video
processor, and the other side being connected to the serial port on the PC.
Double click
Firstly, users can choose the right serial port, set the Boud rate to 9600,
choose LPC2368, and to load the aim document (hex file) for IP board
upgrading;
Secondly, tick the item below to confirm.
Finally, click the ―start‖ button.
VSP 5360
to run flash magic, setting as below:
User Manual
71
Advertisement
Table of Contents
