RGBlink VSP 5360 User Manual page 46

4. Menu Orientation
MENU
GrnOnWh2: Green On White 2.
RedOnBk1: Red On Black 1.
RedOnBk2: Red On Black 2.
RedOnWh1: Red On White 1.
RedOnWh2: Red On White 2.
ALPHA: It can set the image transparency, regulating range between 0 -
128.
SET VALUE:
INSIDE: In image 2, if the pixel value is higher than the setting value, then
the image is the graphic content pixel, otherwise, it is the graphic
background pixel.
OUTSIDE: In image 2, if the pixel value is lower than the setting value, then
the image is the graphic content pixel, otherwise, it is the graphic
background pixel.
RED: Red limit, cut-off point condition of INSIDE and OUTSIDE condition in
red channel, the range is 0 ~ 255.
GREEN: Green limit, cut-off point condition of INSIDE and OUTSIDE
condition in green channel, the range is 0 ~ 255.
BLUE: Blue limit, cut-off point condition of INSIDE and OUTSIDE condition
in blue channel, the range is 0 ~ 255.
For more details, please refer to: How to Realize DSK Setting.
TRANSITION: Settings are as follows:
MODE: There are 2 kinds of modes, cut and fade.
FADE TIME: 0~1.0S.
PREVIEW SWAP: User can choose ―ON‖ or ―OFF‖ to open or close this
function.
SAVE SETUP: Settings are as follows:
SAVE TO: User can save the parameter to SAVE0 to SAVE12.
RECALL: User can load the saved parameters from SAVE0 to SAVE12.
VSP 5360 User Manual 46