Led Display Only Displays Part Of The Image; Signal Needs To Scale; No Display In The Second Half Part Of Led Display; Resolution Is Insufficient - RGBlink VSP 5360 User Manual

LED Display Only Displays Part of the Image

Signal Needs to Scale

Push [Scale/Position] button in the processor and knob to adjust the
actual screen size of the screen, including ―H Size‖, ―V Size‖ and ―Reset‖.
Push the knob to confirm.

No Display in the Second Half Part of LED Display

Resolution is Insufficient

Please make sure the points of the screen width and height, choose the
resolution to be bigger than screen width via push [MENU] button to find
[OUTPUT FORMAT], and push the knob to confirm.

Sending Card Can not Take Lower Part

TS 802 can control the max horizontal resolution 2048, and vertical
resolution 640. Each CAT5 output is 320 pixels.

All Key Lights Light on Simultaneously

Check If Dial Switch is Normal

Shut the power, check if two red dial switches near CV are upward. Reboot
if they face down, and reboot. The function of the red dial switched is
mainly upgraded.
VSP 5360 User Manual 65