How To Add Or Clear The Layer - RGBlink VSP 5360 User Manual

5. System Setup and Operation

How to Add or Clear the Layer

How to Add or Clear the Layer
In EFFECTS area, add the layer according to actual need, that is push any
key of layer A, B, C, D (or select all the 4 keys), key lights and flashes
means the layer is selected, and add layer finished.
For example, add layer B, layer B key lights and flashes, LCD panel shows
as follows:
In EFFECTS area, push any key of layer A, B, C, D that need to clear, key
flashes.
Push the key again, key light is off, and clear layer finished.
For example, clear layer B, LCD panel shows as follows:
VSP 5360
ON LAYER B
H POS: 0
H SIZE: 1024
OFF LAYER B
User Manual
V POS: 0
V SIZE: 768
52