Table of Contents
Advertisement
2. Hardware Orientation
VSP 5360 Back Panel
25：3G SDI Input
Can receive video signal from HD player, and HD camera, connect
interface 16 via 75 ohms BNC port. Connect LED screens via network
cable.
26：SDI Loop Out
DVI loop out, can connect the next level VSP 5360 or the device with DVI
loop out.
27. 28. 29：Program Output
Program output interface can connect with next displayer or send signal to
LED through sending card. Output signals are through DVI-I.
30：Preview Output
Preview: Outputs can be programmed as preview output, VGA outputs are
set as preview.
OUTPUT
5.6.10.11: 10/100M Interface RJ45
Gigabit copper port, used to connect LED screen.
7.12：Power Supply Port of Sending Card
Power has been already supplied by video processor itself, no external
power supply needed.
8.13：USB Control Port of Sending Card
18.19：VGA Output
Connect to the monitor or LED screen which has VGA interface
(This DVI connector does not support hot-plugging).
VSP 5360
Note
Interface 25 and 26 is SDI input and SDI
loop out, S optional module.
User Manual
27
Advertisement
Table of Contents
