5. System Setup and Operation
How to Set up the Position of the Image
How to Set up the Position of the Image
1. Push [Scale/Position] button two times, the button lights, user can set up
the position of the image.
2. Rotate the knob, and adjust the vertical and horizontal position.
3. If quality image distorts by mistake in improper operation, it can be
initialized operation to recover factory setting.
4. Push any other button, [Scale/Position] button light is off, and close the
position setting function.
VSP 5360
—>H POS
V POS
RESET
User Manual
0
0
55