Making Copies; How To Copy; Entering Copy Mode; Making A Single Copy - Brother MFC-685CW User Manual

13

Making copies

How to copy

Entering Copy mode

When you want to make a copy, press
(Copy) to illuminate it in green.
The LCD shows:
01
1
Quality
Enlarge/Reduce
Ratio:
Paper Type
COPY
1 No. of Copies
You can enter the number of copies you want
by using the dial pad.
Press or to scroll through the Copy key
a b
options.
Quality (See page 79.)
Enlarge/Reduce (See page 79.)
Paper Type (See page 82.)
Paper Size (See page 82.)
Brightness (See page 81.)
Contrast (See page 82.)
RED Adjust (See page 82.)
GREEN Adjust (See page 82.)
BLUE Adjust (See page 82.)
Stack/Sort (See page 81.)
Page Layout (See page 80.)
Set New Default (See page 83.)
Factory Reset (See page 83.)
78
13
13
Normal
100%
100%
Plain Paper
Copy Start Press
When the option you want is highlighted,
press OK.
Note
The default setting is Fax mode. You can
change the amount of time that the machine
stays in Copy mode after the last copy
operation. (See Mode Timer on page 21.)

Making a single copy

a
Press (Copy).
b
Load your document.
(See Loading documents on page 9.)
c
Press Mono Start for Monochrome
copy or Colour Start for colour copy.

Making multiple copies

You can make up to 99 copies.
a
Press (Copy).
b
Load your document.
(See Loading documents on page 9.)
c
Enter the number of copies you want.
d
Press Mono Start or Colour Start.
Note
To sort the copies, press
Stack/Sort. (See Sorting copies using
the ADF on page 81.)

Stop copying

To stop copying, press Stop/Exit.
13
13
13
or to choose
a b
13