Brother MFC-685CW User Manual page 102

Chapter 14
g
Do one of the following.
Press OK and change the print
settings. (See page 96.)
If you do not want to change any
settings, press Colour Start to print.
Enhance Scenery
Enhance Scenery is best used for adjusting
landscape photographs. It highlights green
and blue areas in your photo, so that the
landscape looks more sharp and vivid.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press (PhotoCapture).
b
Press a or b to choose
Photo Effects.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose
Enhance Scenery.
Press OK.
e
Do one of the following:
Press OK if you do not want to
change any settings.
Press a or b to adjust the effect level
manually.
Press OK when you have finished.
f
Press a or b to increase or decrease the
number of copies.
g
Do one of the following.
Press OK and change the print
settings. (See page 96.)
If you do not want to change any
settings, press Colour Start to print.
Remove Red-Eye
The machine detects eyes in your photos and
will remove red-eye from your photo.
92
Note
There are some cases when red-eye may
not be removed.
• When the face is too small in the image.
• When the face is turning too far up,
down, left or right.
14
a
Make sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press
b
Press a or b to choose
Photo Effects.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose
Remove Red-Eye.
Press OK.
When Remove Red-Eye is
successful, the photo after effect is
shown. The adjusted part is shown in
a red frame.
When Remove Red-Eye is
unsuccessful,
Unable to Detect. is shown.
Press OK to go back to the previous
level.
Note
Press # to try Remove Red-Eye once
again.
e
Press OK and a or b to increase or
decrease the number of copies.
f
Do one of the following.
Press OK and change the print
settings. (See page 96.)
14
If you do not want to change any
settings, press Colour Start to print.
(PhotoCapture).