DCx-1500i and
DCx-1500fD
light engine
Color filter
lamp
lens system
lens options
gamma
Correction
Picture Quality
Communications
Inputs
outputs
Contrast Ratio
lumens
lamp life
Power
Dimensions
Dimensions with
Variscope 2.35
options
** VariScope feature not available with this lens option.
** VariScope feature not available with this lens option.
*** Depending on lamp power setting, installed iris and iris setting.
DCx-1500i
Cinema Contrast three chip DLP™ light engine
Filmic Color Correction Filter
Xenon lamp 1225W
VariScope constant height lens system
.67:1** RP lens
1.86-2.58:1*
†
1.1:1** FP lens
2.65-4.0:1*
1.45-1.8:1*
4.5-6.7:1*
Film 1 Correction
Film 2 Correction
B&W Film Correction
Incandescent Light Correction
Fluorescent Light Correction
Sunlight Correction
Multi Standard Color Management and
Calibration Control
White Field Uniformity/Correction
RS232 in and out
IR input
Wolf Sentry IP monitoring and control
6 HDMI 1.3 inputs (1 on front panel), 2
Component, 1 S-Video, 1 Composite
1 HDMI 1080P Video (set to native rate of
display)
1 HDMI audio loop out with delay
2,500- 50,000:1 full on/off ***
7250***
2500 to 4000 depending on lamp power setting
200 VAC to 240 VAC ± 10% @ 50/60 Hz,
Power consumption: 2000W maximum, Thermal
dissipation: 6825 BTU/hr, Operating current: 10A
@ 200V
Length: 21 1/2
Width: 28 1/4
Height: 11 1/2
Length: 31 3/4
Width: 28 1/4
Height: 11 1/2
VariScope 2.35
Automated 2.35 lens and motor for use with
VariScope lenses
Wolf WARP
Geometric distortion correction for more flexible
installation solutions
5-3
Section 5 ► Specifications
DCx-1500fD
Cinema Contrast three chip DLP™ light engine
Filmic Color Correction Filter
Xenon lamp 1225W
VariScope constant height lens system
.67:1** RP lens
1.86-2.58:1*
1.1:1** FP lens
2.65-4.0:1*
1.45-1.8:1*
4.5-6.7:1*
Film 1 Correction
Film 2 Correction
B&W Film Correction
Incandescent Light Correction
Fluorescent Light Correction
Sunlight Correction
Multi Standard Color Management and
Calibration Control
White Field Uniformity/Correction
RS232 in and out
IR input
Wolf Sentry IP monitoring and control
6 HDMI 1.3 inputs (1 on front panel), 2
Component, 1 S-Video, 1 Composite
1 HDMI 1080P Video (set to native rate of
display)
1 HDMI audio loop out with delay
2,500- 50,000:1 full on/off ***
7250***
2500 to 4000 depending on lamp power setting
200 VAC to 240 VAC ± 10% @ 50/60 Hz,
Power consumption: 2000W maximum, Thermal
dissipation: 6825 BTU/hr, Operating current: 10A
@ 200V
Length: 41 5/8
Width: 29 7/8
Height: 12 1/8
Length: 41 5/8
Width: 29 7/8
Height: 12 1/8
VariScope 2.35
Automated 2.35 lens and motor for use with
VariScope lenses
Wolf WARP
Geometric distortion correction for more flexible
installation solutions