Table of Contents
Advertisement
Section 3 ► Operation
editing a Channel setup
CHANNEL EDIT — STEP 1
CHANNEL EDIT — STEP 2
CHANNEL EDIT — STEP 3
To DeleTe MUlTIPle Channels, highlight any channel in the Channel Setup menu and
press
to go to the Channel Copy/Delete submenu. Select "Delete Unlocked Only" and
Func
press
to delete all unlocked channels. Or select "Delete All Channels" to delete all channels,
even those that are locked. In either case, the current channel will remain but will be redefined
from projector defaults.
noTe: For any deletion, a confirmation box appears to make sure that you really want to delete.
Select "Cancel" (default) if you don't want to delete after all.
The basic setups that describe how and where a channel can be accessed are listed in the
Channel Setup menu. These channel setups can be edited at any time in the Channel Edit
submenu.
Press
from the presentation level to display the main menu. To display the Channel Setup
Menu
menu, press
, or move the highlight to the Channel Setup option and press
3
Channel Setup menu will appear.
To edit parameters shown in the Channel Setup menu, select the relevant channel and press
. The Channel Edit menu will appear similar to the sample shown below.
If desired, review and/or edit the following channel setups in the Channel Edit menu:
•
An alpha-numeric label can be defined and/or changed here. Channel
Channel naMe:
names can be up to 12 characters in length.
•
Channel nUMbeR:
noTes: 1) If you enter a channel number that already exists, a dialog message appears
indicating that this number is already in use – assign a different channel number. 2) You can
define up to 50 channels.
•
InPUT:
1-8, corresponding to where on the projector's input panel the source is
connected.
•
If checked (default, except for automatically defined channels with unchanged
In MenU:
parameters), this defined channel will then appear in the list available when
pressed. If unchecked, the channel must be accessed via
Auto Source function.
noTe: Onscreen display of the channel list is an option that must be set in the Menu
Preferences menu.
3-18
Figure 3.12. Channel Edit Menu (SAMPLE)
A 2-digit channel number can be changed here.
. The
key is
Channel
on the keypad or via the
Channel
Advertisement
Table of Contents
