Table of Contents
Advertisement
Section 3 ► Operation
geometry and
Position Menu
In the Geometry and Position
menu, you can increase or
decrease the size of your
image, change its proportion
(aspect ratio), move the image
to a specific area of the screen,
and refine other related
parameters. Use Geometry
and Position controls to match
the image precisely to the
screen used at the site.
Refer to "Using Slidebars and
Other Controls" (earlier in this
section) if you need help using any of the options and controls. Changes made in the Geometry
and Position menu are applied immediately and are saved when you exit the menu (press
or
).
Menu
ResIze PReseTs
noTe: The same resize presets are available to all HD and HD2 widescreen models. Please
note however, the graphics used to describe each preset in this section are of the SXGA+ models
only.
Select a Resize Presets option to quickly display an image in its native resolution or to automatically
resize an image to closely fill the projector's native resolution or to optimize the width or height
of your display. Size, Position and Blanking parameters will automatically adjust accordingly or,
if Blanking is set first, which defines an Active Input Area; Resize Preset scaling will occur in this
region of interest only. Resizing options are explained in detail below.
WhaT Is The ResIzIng DefaUlT? By default when displaying a new source, your image will
utilize as much of the projector's display area as possible for the type of incoming source data,
but with minimal or no changes to aspect ratio. See Select "Default" on the following page.
When "CUsToM" aPPeaRs: The "Custom" re-size descriptor automatically appears in the
Geometry and Position menu when any of the values for Size, Vertical Stretch, H-Position,
V-Position or Blanking do not correspond to those for a preset. This option is not offered in the
Resize Presets pull-down list.
3-20
Geometry and Position
1.
Resize Presets
2.
3.
Vertical Stretch
4.
Pixel Track
5.
Pixel Phase
6.
H-Position
7.
V-Position
8.
9.
0.
Advanced Size and Position
1. Default
2. No Resizing
3. Full Size
4. Full Width
5. Full Height
6. Letter Box
No Resizing
Size
1000
1000
858
0
360
262
Exit
Advertisement
Table of Contents
