Table of Contents
Advertisement
Ventilation
Slots and vents in the projector provide ventilation. Never block or cover these openings. This
ensures reliable operation of the projector and prevents overheating.
•
Do not place the projector over a radiator or heat register. The projector should not be placed
in an enclosure unless proper ventilation is provided.
•
Do not insert objects into the ventilation openings of the projector. They may touch dangerous
voltages or short-out components resulting in a fire or shock hazard. Do not spill liquids of
any kind into the projector. Should an accidental spill occur, immediately unplug the projector
and have it serviced by a qualified service technician.
servicing
If any of the following conditions exist, immediately unplug the projector from the power outlet
and ask a qualified service technician to look at it.
•
The power cord has been damaged.
•
The internal cooling fans do not turn on within two minutes when the projector is first powered
up.
•
Liquid has been spilled into the projector.
•
The projector has been exposed to excessive moisture.
•
The projector is not operating normally or its performance has significantly deteriorated in a
short period of time.
•
The projector has been dropped or the shipping case (if applicable) has been badly
damaged.
Do not attempt to service the projector yourself. all servicing must be
Use replacement parts that are manufacturer-approved only. Use of any other
part other than the ones specified by the manufacturer can result in fire, electric
performed by Wolf Cinema accredited service technicians.
shock or other damage.
4-3
WaRnIng
Section 4 ► Maintenance
Advertisement
Table of Contents
