Table of Contents
Advertisement
blanKIng (ToP, boTToM, lefT, and RIghT):
Crop the image as desired so that unwanted
edges are removed from the display (changed to
black—see right). Blanking defines the size of the
Active Input Window, or area of interest. Range
of adjustment depends on the source resolution
and other factors. After adjustment of blanking it
may be necessary to perform a source switch.
noTe: Blanking a PIP image resembles zoom
(see Figure 3.14). For example, left Blanking
zooms the right side of the PIP image; Right
Blanking zooms the left side. There are no black
bars.
P IP Advanc ed S ize & P os ition
Active Input Window
1600x1200
1.
Top Blank
0
2.
Bottom Blank
0
3.
Left Blank
0
4.
Right Blank
0
Plug & Display <EDID>
5.
Native Resolution 60Hz
PlUg & DIsPlaY (eDID): By default, a Plug & Play (EDID)
source outputs a signal according to the EDID information
provided by the projector. To override this information and
display in a different format (for example, if your Plug & Play
[EDID] device does not support the projector's resolution and/
or frequency), select the desired Plug & Play (EDID) resolution
from the list.
EDID = Extended Display Identification Data standard.
3-23
Figure 3.13. Blanking of a Primary Image
1.
2.
3.
4.
5.
Figure 3.14. Blanking of a PIP Image
Section 3 ► Operation
P IP Advanc ed S ize & P os ition
Active Input Window
1600x1200
Top Blank
49
Bottom Blank
2
Left Blank
485
Right Blank
67
Plug & Display <EDID>
Native Resolution 60Hz
1.
Native Resolution 60 Hz
2.
1400x1050 60 Hz
3.
720p (1280x720 60Hz)
4.
DC2K (2048x720 60Hz)
5.
1024x768x116Hz 3D
6.
1280x1024x110Hz 3D
7.
1400x1050x102Hz 3D
8.
1080p 60Hz / 1080i 60Hz
9.
1080p 50Hz / 1080i 50Hz
0.
1080p 24Hz / 1080i 30Hz
Advertisement
Table of Contents
