Table of Contents
Advertisement
4.1 Warnings and safety
guidelines
labels and Markings
Instructions
Projector location
The projector is an international regulatory agency approved product designed for safe and
reliable operation. To assure complete safety at all times it is important to acknowledge the
following precautions while operating the projector.
always power down the projector using appropriate procedure and disconnect
all power sources before cleaning or servicing.
always remove the lens when shipping the projector.
neVeR look directly into the projector lens.
The high brightness of this projector could cause permanent eye damage.
for protection from ultraviolet radiation, keep all projector shielding intact
Qualified personnel should perform installation ONLY.
Observe and follow all warnings and instructions marked on the projector.
The exclamation point within the equilateral triangle alerts the user to important
operating and maintenance (servicing) instructions in the literature accompanying
the projector.
The lightning flash and arrowhead symbol within the equilateral triangle alerts
the user to uninsulated "dangerous voltage" within the projector's enclosure
that may be of sufficient magnitude to constitute a risk of electric shock.
Read all operating instructions prior to using the projector.
Operate the projector in an environment, which meets the operating range specified in Section
6 – Specifications.
•
Do not operate the projector close to water, such as near a swimming pool. Do not operate
in extremely humid environments.
•
Do not place the projector on an unstable cart, stand or table. A projector and cart combination
should be used with care. Sudden stops, excessive force and uneven surfaces may cause
the projector and cart combination to overturn.
•
Only use Wolf Cinema-approved ceiling mount fixture, if the projector is to be ceiling
mounted.
4-1
MaInTenanCe
WaRnIng
WaRnIng
WaRnIng
WaRnIng
during operation.
CaUTIon
seCTIon 4
Advertisement
Table of Contents
