Table of Contents
Advertisement
Section 2 ► Installation and Setup
2.2 Installation
Proper installation of your projector will ensure the quality of your display. Whether you are
installing a projector temporarily or permanently you should take the following into account to
Considerations
ensure your projector performs optimally.
Choose the installation type that best suits your needs: front or rear screen, floor mount or
Installation Type
inverted mount.
fRonT sCReen InsTallaTIons
screen Type
In front screen installations the projector and audience are positioned in front of the screen,
which can be flat or curved.
Flat screens are recommended with this projector. They offer a gain of about 1 with a viewing
angle just less than 180°. This type of screen reflects incident light equally in all directions so the
audience can see the display from various angles.
Curved screens have a gain greater than 1 with a viewing angle much less than 180°. This type
of screen does not reflect incident light equally in all directions instead it is concentrated in a
viewing cone. The audience sitting within the viewing cone area will see a brighter image than
those sitting just outside this area.
2-3
Advertisement
Table of Contents
