When Moving The Unit; Procedures From Preparing To Move Through Reinstalling - Roland VersaStudio BN-20 Master Manual

When Moving the Unit

Procedures from Preparing to Move Through Reinstalling

To move the machine, you must completely drain all ink inside the machine and secure
the print heads in place with packing materials to protect them. Attempting to move
the machine without first doing this may result in damage to internal components due
to leaking ink or damage to the heads.
Important Notes on Moving
 Once the preparations for moving are complete, move the machine and fill it with ink with as little delay
as possible. Allowing the machine to stand without ink may damage the print heads.
 When moving the machine, keep it at a temperature between 5 to 40˚C (41 to 104˚F) and at relative humidity
between 20 to 80% (with no condensation). Failure to do so may result in breakdown.
 Handle the machine with care when moving, keeping it level (not tilted at an angle) and preventing it from
striking other objects.
Procedure

Open the Utility window.
 P. 7, "How to Open the Utility Window / Exit the Utility"


Move as soon as possible.

Immediately reinstall the machine and fill with ink.
See "First Step Guide" and promptly fill with ink.
82
Chapter 3 Maintenance
In the [Opton] tab, click [Ink is being pumped
from the ink tanks].
Carry forward the work by following the instructions dis-
played on the screen.