Roland VersaStudio BN-20 Master Manual page 46

Using Metallic Silver Ink


Enter values for [Red (R)], [Green (G)], and [Blue (B)].
The BN-20 driver identifies the color specified using the values entered here as the metallic color used
in printing, and outputs the color.
2.
Creating Print Data

Create the print data using application software for creating drawings.
Set the Document Color Mode to [RGB]. Because CMYK is converted to RGB when outputting in CMYK
mode, the color (RGB value) specified as the cutting line may change. In this case, it is not possible
to print using a metallic color or to perform cutting because the color specified for the driver as the
cutting line and the color output from the application software differ.
44
Chapter 2 Fully Utilizing the Machine
Click [Define Custom Colors].
The Color Settings screen opens allowing you to create col-
ors.