Roland VersaStudio BN-20 Master Manual page 35



Enter values for [Red (R)], [Green (G)], and [Blue (B)].
The BN-20 driver identifies the color specified using the values entered here as the cutting line, and
outputs the color.
2.
Creating Print Data

Create the print data using application software for creating drawings.
Set the Document Color Mode to [RGB]. The color (RGB value) specified as the metallic color may
change because CMYK is converted to RGB when outputting in CMYK mode. In this case, it is not
possible to print using a metallic color or to perform cutting be
Click [Define Custom Colors].
The Color Settings screen opens allowing you to create col-
ors.
Chapter 2 Fully Utilizing the Machine
Cutting / Printing & Cutting
33