Connect Power Supply To Vehicle Cradle; Cradle Power Connector Port - LXE MX9 User Manual

Connect Power Supply to Vehicle Cradle

Connect Power Supply to Vehicle Cradle
The power cable connector is L-shaped.
The long end of the L (the cable) will be facing up towards the middle strain relief cable clamp.
Align the connector pins to the vehicle cradle Power connector; firmly pushing the connector into the Power port.
Tighten the nut of the plug clockwise until the power cable is securely fastened.
Secure the cable to the cradle with the LXE-installed strain relief cable clamp (see section titled Vehicle Cradle Strain Relief
Cable Clamp).
The power LED on the MX9 illuminates when it is receiving external power and an MX9 is docked.

Cradle Power Connector Port

Note: When an external power supply is used to power this cradle, the external power supply should be UL Listed, with
LPS or Class 2 outputs rated 12V, minimum 2 Amps.
Pin Signal
1 Ground (CG) Green
2 Return (-)
3 +12V (+)
E-EQ-MX9OGWW-D [ 28 ] MX9 User Guide
Wire Color
Blue
Brown