5. Maintenance
General Maintenance
Watch out for fuel and oil leakage, re-
pair if necessary.
Regularly check screws and nuts for tight
fit, re-tighten, if necessary.
Lubricate all gliding and moving parts
(e.g. speed control lever, bearings of hand
levers) with Bio-lubricating grease or Bio-
lubricating oil.
Cleaning
Machine
After cleaning with air-compressed water
jets immediately lubricate lubrication points
on the machine and operate mowing drive
for a short time to press out penetrated wa-
ter.
5
5
5
Apply grease generously to leave a grease
neck around bearing to prevent water, plant
sap and dirt from penetrating.
I
Engine
Clean engine only with a cloth. Avoid spray-
ing with water jets, as water might penetrate
into ignition and fuel system and cause mal-
functions.
agria Grassland Mower 5300
41