Agria 5300 621 Translation Of The Original Operating Instructions
  1. Manuals
  2. Brands
  3. Agria Manuals
  4. Farm Equipment
  5. 5300 621
  6. Translation of the original operating instructions
Agria 5300 621 Translation Of The Original Operating Instructions

Agria 5300 621 Translation Of The Original Operating Instructions

Meadow mower
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Translation of the original Operating In-
structions
Meadow mower
agria 5300
Petrol engine: Honda
Worms
5300 535, -621
Before commissioning please read the operating instructions
and note the safety and warning information!
Operating Instructions No. 998 498GB 03.23

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 5300 621 and is the answer not in the manual?

Questions and answers

Related Manuals for Agria 5300 621

Summary of Contents for Agria 5300 621

  • Page 1 Translation of the original Operating In- structions Meadow mower agria 5300 Petrol engine: Honda Worms 5300 535, -621 Before commissioning please read the operating instructions and note the safety and warning information! Operating Instructions No. 998 498GB 03.23...

  • Page 2: Nameplate

    Petrol engine: Engine no. see page 4, Fig. B/6 Please provide this information for each spare parts order, to prevent errors in delivery. Only use genuine Agria spare parts! The technical data, illustrations and dimensions provided in these operating instructions are non-binding. No claims may be derived from them.

  • Page 3: Symbols

    Before each start-up Mower drive After each cleaning (in particularly with a high- pressure cleaner) Wheel drive Annually forward See separate engine operating instructions reverse - agria-Service - = contact your agria ser- vice centre Fast Slow Meadow mower agria 5300...

  • Page 4: Designation Of Parts

    Designation of parts agria 5300...
  • Page 5 Air filter Exhaust with contact guard Carburettor Sparking plug, sparking-plug connector Fuel tank cap Oil dipstick Fuel tank Engine oil drain plug Choke lever Fuel cock Engine type no. Engine stop switch Starter handle Fan grille Meadow mower agria 5300...

  • Page 6: Table Of Contents

    Starting the petrol engine ................32 Stopping the petrol engine ................33 Mowing ....................... 33 Mowing on slopes ..................36 Safety instructions for handling ..............38 5 Maintenance and Repair ............. 39 Petrol engine ....................40 Meadow mower agria 5300...
  • Page 7 7 Decommissioning / Disposal ............58 Electric diagram of petrol engine ............ 59 Inspection and Maintenance Overview........... 60 Lubrication plan ................62 Paints, Wear parts................63 Declaration of Conformity ..............64 Designation of parts ................. 66 Meadow mower agria 5300...

  • Page 8: Unpacking And Assembly Instructions

    • Pull the machine rearwards out of the cardboard box Attach the cutter bar (5). See page 26 Carry out the steps for initial startup. See page 28. Meadow mower agria 5300...

  • Page 9: Safety Instructions

    After attaching the clearing blade, which its for liability of the manufacturer. is also included in the Agria sales list, it may also be used as a snow clearing ma- Improper use of the machine can endan- chine (intended use).
  • Page 10 Operator clothing must fit tightly. Wear to prevent damage to tools. sturdy footwear. The affixed warning and information signs provide important information for safe operation; please observe them for your own safety! Meadow mower agria 5300...
  • Page 11 There may be tension Secure machine and implements against in the drive train as a result of the block- rolling away (parking brake - if installed, age, which is why you should resolve the wheel chocks). blockage carefully. Meadow mower agria 5300...
  • Page 12 Wear protective goggles and protective Only use genuine Agria spare parts. gloves when you grind the knives. Carry out a functional and safety test after Ballast completing the work.
  • Page 13 This applies in particular Before disposing of opened and seem- to wearers of pacemakers. ingly empty pressurized tins make sure they are completely empty. Empty them in a well-ventilated area safe from sparks Meadow mower agria 5300...
  • Page 14 Keep a safe distance to the mower knives when the engine is running! When working with the machine wear individual hearing pro- tection. Wear protective gloves. Wear safety shoes. Meadow mower agria 5300...

  • Page 15: Technical Data

    Clutch: V-belt clutches with tension rollers between engine and gearbox, friction clutch for reverse gear Use only genuine Agria V-belts! (see wearing parts page 63) Gearbox: ............. Worm gear with switchable wheel drive Gearbox oil: .............. Oil filling volume approx. 0.6 l Gearbox oil SAE 90 –...
  • Page 16 2 Technical Data Dimensions (mm): 860-1080 1550 910 or 1050 (corresponding to cutter bar ver- sion) Twin tyres 762 Twin tyres 857 Meadow mower agria 5300...

  • Page 17: Petrol Engine

    Mixture adjustment screw: ......Basic setting approx. 2 1/8 turn open Engine oil: ............... Filling volume approx. 0.6 l Multigrade oil SAE 10W-30, quality class API-SJ or higher Slope capability: ................... < 30° (58 %) (with engine oil level "max." = upper level mark) Meadow mower agria 5300...

  • Page 18: Petrol Engine

    Carburettor: .................. Throttle valve type ......................Engine oil: ............... Filling volume approx. 0.6 l Multigrade oil SAE 10W-30, quality class API-SJ or higher Slope capability: ................... < 30° (58 %) (with engine oil level "max." = upper level mark) Meadow mower agria 5300...

  • Page 19: Devices And Operating Elements

    3 Devices and Operating Elements 3 Devices and Operating Elements The meadow mower agria 5300 is suita- traffic regulations of the relevant coun- ble to be used for the maintenance of try must be complied with (marking, light- green areas and parks as well as in agri- ing, etc.).

  • Page 20: Speed Regulating Lever

    Never tamper with the safety circuit. Never tie up the safety lever. The safety lever is used as an emergency off switch: Release the lever in a dangerous sit- uation. It swings automatically to "STOP" position! Meadow mower agria 5300...

  • Page 21: Engine Stop Switch

    The F/R hand lever (C/5) is pressed down (released) Press the safety lever (C/4). Reversing: Release the safety lever (C/4) Press the stop pawl (C/6) on the F/R hand lever (C/5) Pull the F/R hand lever fully up. Meadow mower agria 5300...

  • Page 22: Wheel Drive

    Mower drive The mower blades are driven by a crank drive. The mower drive is switched on/off at the shift lever (C/7). Only shift the mower drive after you have re- leased the safety lever (idling). Meadow mower agria 5300...

  • Page 23: Steering Bar

    Steering bar side adjustment • Release the grip screw (1) until the notches are released. • Swing the steering bar to the required side, and let it engage in the proper meshing. • Tighten the grip screw. Meadow mower agria 5300...

  • Page 24: Driving Wheels

    (Fig. K or L) and let it engage into an an- nular groove on the wheel shaft. • Coat both sides of the wheel shaft ends (small shaft diameter) with organic lubricating grease. To remove the driving wheels, proceed in reverse order. Meadow mower agria 5300...
  • Page 25 (Fig. M). They mostly prevent the grass from being wrapped around the wheel shaft. To remove wrapped up grass, simply remove the driving wheels and the wrap protection tubes with- out tools. Meadow mower agria 5300...

  • Page 26: Cutter Bar

    With twin and grid driving wheels, the switching positions rigid drive / neutral gear / dif- ferential-type drive effect are also possible. Cutter bar The cutter bars approved in the Agria • Set the knife driver (8) on the cutter sales list are available.

  • Page 27: Attachment Points

    If you want a higher cut, you can attach 2 height-adjustable gliding soles to the cutter bar. (Special equipment Agria no. 713 22 = 1 pair) With cutter bar version S, the existing skid must be repositioned so that the bulge points upwards (see Fig.

  • Page 28: Commissioning And Operation

    Use only branded petrol. Caution is needed when handling fuel. Petrol is highly flammable and explosive un- der certain conditions! Do not refuel in closed rooms. Refuel only with the engine switched off and cooled down. Meadow mower agria 5300...
  • Page 29 If you spilled fuel, push the machine away from the spilled liquid before you start the engine. Bowden cable for the safety function Check the Bowden cable of the safety function for damage. Replace a defective Bowden cable immediately! Meadow mower agria 5300...

  • Page 30: Before Starting The Engine

    Keep a suf- ficient distance from hot surfaces and keep chil- dren away from the running engine. When the petrol engine is running, do not touch or remove the ignition cable or spark plug connector. Meadow mower agria 5300...

  • Page 31: Danger Zone

    The user is responsible for third parties in the working area (entire area to be worked on). Hazard area meadow mower Meadow mower agria 5300...

  • Page 32: Starting The Petrol Engine

    Once the engine is running, set the engine speed to min and allow the engine to warm up for a short time. Slowly move the choke actuator back to operating position (if actu- ated). Meadow mower agria 5300...

  • Page 33: Stopping The Petrol Engine

    If you want to shut down the machine for a longer time, do not stop the engine at the engine stop switch. Close the fuel cock(s) and let the en- gine run until it stops. This empties the carburettor and prevents resinification. Meadow mower agria 5300...

  • Page 34: Mowing

    See page 32 Switch on the wheel drive Switch on the mower drive Traction drive at forward movement - F/R hand lever (C/5) released, slowly press down the safety lever (C/4) while you are opening the throt- tle. Meadow mower agria 5300...
  • Page 35 If you have to clean the machine during work, switch off the engine and remove sparking-plug connector(s) and ignition key for safety reasons. Meadow mower agria 5300...

  • Page 36: Mowing On Slopes

    Mowing on slopes Slope capability α = 30° (58%), see pages 17, 18 max. Depending on the type of ground surface (vegetation, humidity ...), wear suitable shoes so that you do not slip or fall. Meadow mower agria 5300...
  • Page 37 ON. To move downhill, follow a diagonal route across he slope. Starting the engine on a slope When you start the engine, leave the wheel drive switched on -> braking ef- fect. Meadow mower agria 5300...

  • Page 38: Safety Instructions For Handling

    Ensure that your feet are at a safe distance from the tools. • Never approach your hands or feet to rotating parts. • Never lift or carry the machine while the engine is running. Meadow mower agria 5300...

  • Page 39: Maintenance And Repair

    Only use genuine Agria spare parts. By using bio-lubricants and bio-slushing Carry out a functional and safety test after oil you act environmentally responsible, completing the work.

  • Page 40: Petrol Engine

    Remove the oil dipstick and check the oil level. • If the oil level is below the lower "min" mark, fill in engine oil (see "Technical data") up to the rim of the oil filler neck "max". Meadow mower agria 5300...
  • Page 41 Tighten the oil drain plug! Oil filing volume and quality see "Technical data". • If possible, use a funnel or a similar fixture to fill in the oil. Fuel hoses Replace every 2 years. Replace leaking plastic hoses immediately. Meadow mower agria 5300...
  • Page 42 Always ensure that the engine idle speed is adjusted correctly. With speed regulating lever at idling, the engine should continue running smoothly. - agria-Service - All further maintenance and care of the engine Engine operating instructions Meadow mower agria 5300...

  • Page 43: Machine

    (1). • Fill in fresh gearbox oil until the oil is level with the filling hole. (Fig. V). • Oil filing volume and quality see "Technical data". • Screw in and tighten the screw plug. Meadow mower agria 5300...
  • Page 44 Remove the driving wheels if necessary. • Prior to mounting the driving wheels, yearly and after each cleaning with a high-pressure cleaner, coat the wheel shaft ends (small shaft diameter) with organic lubricating grease. Meadow mower agria 5300...
  • Page 45 (in par- ticular on the knife driver). When replacing the knife driver fix- ing screws use only genuine Agria screws. Failure to do so can result in knife breakage. Cleaning...
  • Page 46 Next, press down the knife holders to be adjusted. Adjust if necessary. (h) in the direction of the arrow (f) while you are tightening the clamping screws (c) very tightly (70 Nm) with a long ring spanner. Meadow mower agria 5300...
  • Page 47 When fitting new clamping sleeves (10), make sure that the slots always point to the outside! 1 Beam knife 2 Pin carrier 3 Driver sleeve 4 Driver pin 5 Back of the beam 7 Fixing screw 8 Adjusting screw Meadow mower agria 5300...
  • Page 48 Do not chamfer the knives at the front length of approx. 35 mm, or a special (P). sharpening device. • Do not grind the cutting edges in a curve (P). • Remove burrs with a hand stone. Meadow mower agria 5300...
  • Page 49 F/R hand lever is pulled approx. 2/3. The function of safety circuit and clutch may require an adjustment of the V-belt tension on the drive rollers. See page 51. Meadow mower agria 5300...
  • Page 50 Screw the adjusting pin in / out until there is a distance "X" or idling at position 0. Reinsert the cable pull end with the adjusting pin in the retainer and install the shaped spring (2). Meadow mower agria 5300...
  • Page 51 Install the belt guard (D/8). This requires the clutch lever to be set to "Forward movement". Do not use commercially available V-belts. Use only genuine Agria special V-belts! Put the machine only into operation when all protective devices are in protec-...

  • Page 52: Labels

    Replace worn-out and missing signs for operating and safety instructions. 614 76 wheel switching 757 55 speed 104 226 backward 587 50 hearing protection 757 01 mowing drive gearshift 104 234 start/stop 757 05 beam mower 104 233 direction note 104 227 drives off, mower Meadow mower agria 5300...

  • Page 53: General

    Engine Only clean the engine with a cloth. Do not spray with water, as water could enter the ignition and fuel system and cause malfunctions. Meadow mower agria 5300...

  • Page 54: Storage

    Petrol is highly flammable and explosive under certain conditions! Never smoke in the working area. Stay away from naked flames and sparks. Alternatively fill the fuel tank completely and add a fuel stabilizer (Agria no. 799 09) to the fuel - Observe the operation instructions! Let the engine run for approximately 10 minutes.

  • Page 55: Troubleshooting And Remedies

    6 Troubleshooting and Remedies Observe the safety instructions! Faults on the machine or on the engine that make a major intervention necessary must always be repaired by a specialist agria workshop that have the necessary tools. Incorrect intervention will only lead to dam- age.
  • Page 56 Adjust or replace sparking plug quently stalls sparking plug defective when idling Carburettor incorrectly ad- Adjust carburettor justed - agria-Service - Air filter contaminated Clean air filter Petrol engine Control linkage contaminated, Clean control linkage works erratically sticking Meadow mower agria 5300...

  • Page 57: Machine

    The tips of the The upper blade protrudes too Adjust blade guides lower blade work themselves into the blades of the upper blade * = Contact your agria specialist workshop! BM = See separate operating instructions for engine Meadow mower agria 5300...

  • Page 58: Decommissioning / Disposal

    The machine consists of valuable ping over and rolling away. raw materials, which can be recycled and reused. Wear protective gloves. Take the machine including the remain- ing technical fluids to a recycling facility for disposal. Meadow mower agria 5300...

  • Page 59: Electric Diagram Of Petrol Engine

    Electric diagram of petrol engine Engine flywheel Ignition coil unit Sparking plug Engine stop switch sw = black Meadow mower agria 5300...

  • Page 60: Inspection And Maintenance Overview

    Cutter bar: Check the play of the knife guides - also after each knife change Lubricate the beam supporting pin - also after each knife change Checking the gearbox oil level Cleaning Check bolts and nuts Clean air filter insert Meadow mower agria 5300...
  • Page 61 = before each start-up = after each cleaning, especially with a high-pressure cleaner = See separate operating instructions for engine = maintenance tasks should be performed by your agria service centre = at least annually = inspection and maintenance tasks can be performed by the operator...

  • Page 62: Lubrication Plan

    Lubrication plan Engine oil (page 41) Gearbox oil (page 43) Mower knives (page 45) Mower drive (page 45) Lever bearing (page 53) Meadow mower agria 5300...

  • Page 63: Paints, Wear Parts

    305 65 Housing cover seal (worm gear) 481 75 V-belt for clutch 481 74 V-belt for reverse drive Attention: Use only genuine Agria V-belts! Honda engine 761 99 Air filter element, set 759 99 Sparking plug, Bosch WR7DC Worms engine...

  • Page 64: Declaration Of Conformity

    Declaration of Conformity Meadow mower agria 5300...
  • Page 65 Meadow mower agria 5300...

  • Page 66: Designation Of Parts

    Threaded pin for belt guard hood Locating holes for belt guard holder Drive V-belt pulley (on crankshaft) Belt guiding plate Belt guard hood Spring washer Locknut Reverse gear rubber roller Drive V-belt for reverse gear Drive V-belt pulley (on gearbox shaft) Meadow mower agria 5300...
  • Page 67 5300...
  • Page 68 Agria-Werke GmbH Bittelbronner Straße 42 D-74219 Möckmühl Tel.: +49 6298 39-0 Fax: +49 6298 39-111 E-Mail: info@agria.de Internet: www.agria.de Your local agria specialist dealer:...

This manual is also suitable for:

5300 5355300

Table of Contents