5 Maintenance and Repair
General
Cleaning
Before each start-up check for escaping fuel and
oil and eliminate the cause.
- agria-Service -
Regularly check nuts and bolts for tightness and
retighten if necessary.
At least yearly and after cleaning:
Lubricate all sliding or moving parts (such as
speed regulating lever, hand lever bearing, etc.)
with bio lubricating grease or bio lubricating oil.
Machine
Clean thoroughly with water immediately after
each use.
Do not expose electric cables and components
to direct water jets.
Afterwards, lubricate all sliding parts with organic
lubricating oil or with organic lubricating grease.
In addition, lubricate the lubrication points on the
machine immediately after cleaning with a high
pressure cleaner, and put the machine briefly
into operation to press out penetrated water.
To protect the bearings against penetrating dirt,
sap and water, there shall be a grease collar at
the bearing points.
Brush mower agria 8000
47