LED Indications (Continued)
Table 2-4
Off
Charging/Battery Status LED
Slow Blinking Amber
Solid Amber
Fast Blinking Amber
Off
WAN Radio Status LED
Slow Blinking Green
Off
NOTE For information about scanning/decoding, see
radio status and settings, see
Resetting the MC65
A reset restarts the MC65 by closing all running programs. Data saved in flash memory or a memory card is
not lost.
To perform a reset:
•
On a numeric keypad, simultaneously press the red Power button and the
•
On an alphanumeric keypad, simultaneously press the red Power button and the
Locking the MC65
The user can lock the MC65 to disable key presses and screen tap or by requiring a password to keep your
data secure. Refer to
NOTE The user can make emergency calls even when the MC65 is locked.
The lock screen displays whenever the MC65 is locked. When the MC65 is locked, you still receive
notifications of new messages, missed calls and upcoming appointments. You can also receive a call when the
MC65 is locked. The MC65 locks when a time out has occurred or you lock the MC65 manually.
To manually lock the MC65 tap the lock icon in the center of the Home screen Tile bar.
LED State
Chapter 3, Making
Locking the MC65 on page 9-4
Indication
Data capture not enabled.
Main battery in MC65 is charging.
Main battery in MC65 is fully charged.
Charging error.
Not charging.
RF (WWAN) radio is on.
RF (WWAN) radio is off.
Data Capture on page
2-22. For information about WWAN
Calls, or refer to the MC65 Integrator Guide.
for information on setting up device locking.
Using the MC65 2 - 19
and
keys.
and
keys.