Flat Surface Installation - Motorola MC65 User Manual

10 - 16 MC65 User Guide
Insert MC65 into Vehicle Holder
Figure 10-14
Connect the auto charger cable to the MC65 and slide the two locking tabs up to secure the cable cup to
5.
the MC65.
Connect the other end to the cigarette lighter socket.
6.
The LED indicator on the right side of the touch screen lights up orange during charging.

Flat Surface Installation

Remove the plastic sheet on the bottom of the mounting disc.
1.
Place the disc, sticky side down, on a clean flat surface.
2.
Mounting Disc
Figure 10-15
Fix the suction cup mount to the disc with the suction lever facing up.
3.
Flip the lever down to create a vacuum between the suction cup and the disc.
4.
Make sure that the suction bond is strong enough before proceeding to the next step.
5.
Slide the MC65 into the cradle.
6.
Locking Tab