Adjusting Volume; Battery Status Indications; Led Indicators - Motorola MC65 User Manual

2 - 18 MC65 User Guide

Adjusting Volume

To adjust the system volume:
Press the volume buttons on the right side of the MC65 to increase and decrease the system volume. The
1.
Volume dialog box appears.
As you increase or decrease the volume, the slider moves accordingly. You can also move the slider to
2.
adjust the volume.
Select the Vibrate radio button to turn off the system audio and enable the MC65 to vibrate upon system
3.
notifications.
Select Off radio button to turn off all system audio notifications.
4.

Battery Status Indications

Battery icons appear on the Status Bar indicating the battery power level. When the battery power falls below
a predetermined level the icon indicates the status and a battery dialog box appears indicating the status of the
battery.
The message displays until the user taps Dismiss. Alternately tap the Status Bar to display the Device
Management window. Tap

LED Indicators

The MC65 has three LED indicators. The Data Capture LED indicates status for scanning. The
Charging/Battery Status LED indicates battery charging and status.The Radio Status LED indicates WWAN
radio status. Table 2-4
LED Indicators
Figure 2-24
LED Indications
Table 2-4
Data Capture LED
Solid Green
Solid Red
Flashing Green
Solid Red (after Power button press)
.
describes the LED indications.
Charging/Battery Charging/Battery
Data Capture
Status LED Status LED
LED
LED State
WAN Radio
Status LED
Indication
Successful decode/capture.
Laser enabled, scanning/imaging in process.
Software initiated notification.
MC65 is shutting down for battery replacement.