Accessories; Mod-Serial-Usb - OLIMEX OLinuXino-MAXI User Manual

Open-source single-board linux computer

Hide thumbs Also See for OLinuXino-MAXI:

Table of Contents

OLinuXino User's Manual

Power button – when Linux is running pressing PWR_BUT will put the board in low power mode;

when powered by battery PWR_BUT is used to initially power up the board – and pressing the

board again after it is powered will put it low power mode

Recovery pads (REC) - these can be used for attaching a recovery button; when powered by

battery the recovery button is used to bring the processor to normal power mode – you can short-

circuit the pads for this feature without having to mount a button

512 (32M x 16) MBit DDR SDRAM - the exact memory used in the first revisions of the board is

Xylinx HY5DU121622D

LED1 + Power LED

6.14 Accessories

Here you will find additional information for Olimex products you can use with OLinuXino-MAXI

purchase

The cable for the U_DEBUG interface that can be purchased for additional cost has three cables It

is important to specify in your purchase order whether you want the MOD-SERIAL-USB variant

with male of female connectors.

Page 38 of 48

Table of Contents