Jumper Description; Scl_Sw/Scl_Hw And Sda_Sw/Sda_Hw - OLIMEX OLinuXino-MAXI User Manual
Open-source single-board linux computer
Hide thumbs
Also See for OLinuXino-MAXI:
- User manual (60 pages) ,
- User manual (44 pages) ,
- User manual (47 pages)
Table of Contents
Advertisement
OLIMEX© 2012
OLinuXino User's Manual
6.12 Jumper description
Please note that all the jumpers on the board are SMD type. If you feel insecure of your
soldering/cutting technique it is better not to try to adjust the jumpers.
6.12.1 SCL_SW/SCL_HW and SDA_SW/SDA_HW
Those two jumpers must be moved together – there are two available options – configuring
software I2C interface (SCL_SW, SDA_SW) or hardware I2C interface (SCL_HW, SDA_HW
positions).
The default position is SCL_SW/SDA_SW
Page 36 of 48
Advertisement
Table of Contents
