Pwr Jack; Headphones And Line-In Connector - OLIMEX OLinuXino-MAXI User Manual

OLIMEX© 2012
LED
Right
Left

6.7 PWR Jack

The power jack used is the typical 2.5mm one used by Olimex in most of our products. You should
provide between 6 and 16 volts @ 1A to the board.
Pin # Signal Name
1 Power Input
2 GND
More info about the power supply can be found in chapter 5 of this manual

6.8 Headphones and line-in connector

Standard audio jack and phone jack are mounted for the audio interfacing.
Headphones/Audio out connector
Pin# SIGNAL
2 L channel
3 R channel
5 GND
The headphones resistance is 16 Ohms!
Color
Green
Yellow
NAME Processor Pin#
113
109
GND pins
Link status
Activity status
Page 33 of 48
OLinuXino User's Manual
Usage