Battery Connector; Composite Video Connector - OLIMEX OLinuXino-MAXI User Manual

OLIMEX© 2012

6.9 Battery connector

When using the battery connector keep in mind that it is an energy solution that wouldn't be able to
power the board and all the peripherals. The voltage of a 3.7V LIPO battery would be enough to
power the processor and the memory but won't be enough to power the LAN and the USB hosts.
Pin #
1
2
The pins are also written on the top of the board in the base of the connector.

6.10 Composite video connector

The composite video is the connector you should use if you wish OLinuXino-
MAXI video output on a monitor.
The whole signal is controlled by pin #104 from the i.MX233 processor.
The + signal is lead to the middle of the connector. The outside part is the GND.
Signal Name
VBAT
GND
Page 34 of 48
OLinuXino User's Manual