Jumper Description - OLIMEX STM32-P107 User Manual

Hide thumbs Also See for STM32-P107:
Table of Contents

Advertisement

JUMPER DESCRIPTION

PWR_SEL
When position 1-2 is shorted – the board is power supplied from JTAG.
When position 3-4 is shorted – the board is power supplied from USB_OTG.
When position 5-6 is shorted – the board is power supplied from External
source.
Default state is – position 5-6 – shorted.
B0_0/B0_1
When this jumper is in position B0_1 – BOOT0 is connected to 3.3V, and
jumper is in position B0_0 – BOOT0 is connected to GND.
Default state is B0_0.
B1_0/B1_1
When this jumper is in position B1_1 – BOOT1 is connected to 3.3V, and
jumper is in position B1_0 – BOOT1 is connected to GND.
Default state is B1_0.
VBUS
When is in position "H" - connects +5V_HOST_PWR to OTG_VBUS.
When is in position "O" - connects +5V_OTG_PWR to OTG_VBUS.
Default state is "O".
USB_D+
When is in position "H" - connects USB_HOST_D+ to OTG_DP.
When is in position "O" - connects USB_OTG_D+ to OTG_DP.
Default state is "O".
USB_D-
When is in position "H" - connects USD_HOST_D- to OTG_DM.
When is in position "O" - connects USB_OTG_D- to OTG_DM.
Default state is "O".
PWDW_D
When is closed – disables Ethernet transceiver (STE101P) Power Down Mode. STE101P
is active.
Default state is closed.
power
when the
when the

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the STM32-P107 and is the answer not in the manual?

Table of Contents