Features List - Remotec ZTS-110 Z-Thermostat User Manual

Features List
HVAC System Type Compatible:
Standard (gas/electric) or Heat Pump
Multistage System Compatible:
Standard HVAC Systems: 2 stages heating, 1 stage cooling
Heat Pump Systems: 2 stages heating, 1 stage cooling
Heat Pump change over valve:
Selectable change over with cool or with heat
Program Style:
2 program modes for scheduling (Mo‐Fr, Sa‐Su)
4 Separate Time and Temperature Settings for each program
Heat and Cool set‐points for each program
Temporary Program Override
Permanent Program Override
Built‐in flash memory stores heat and cool program settings
Temperature Display and Control:
Temperature display in °F or °C
Temperature Measurable Range: 32 – 99 °F / 0 – 40 °C
Temperature Setting Range: 41‐99 °F / 5‐37 °C
Adjustable Temperature Control Swing/Differential
a) Swing: 1°F, 2°F, 3°F or 4°F ( 0.5°C, 1.0°C, 1.5°C or 2°C)
b) Differential: 1°F, 2°F, 3°F or 4°F ( 0.5°C, 1.0°C, 1.5°C or 2°C)
Advanced Recovery Mode (ARM)
Defrost Function
Short cycle start up protection
Clock:
Time display format: 12/24 hour clock selection with day displayed
Filter Counter:
Filter change reminder displayed after 500 hours usage (500‐4000hrs)
Z‐Wave:
Support Network Wide Inclusion (NWI) and Explore Frames
Support Easy mode (disable local advanced setup and control)
Support "Frequently Listening Routing Slaves" (FLiRS) mode and "Always Listening"
mode
Support battery level report
Support Association Groups
a) Association Group_1 is used for Heat Pump control
b) Association Group_2 is used for Compressor control
c) Association Group_3 is used to report status change such as AUTO report to
gateway
Power:
Support AA x 4 alkaline batteries or 24Vac input
4