Remotec ZTS-110 Z-Thermostat User Manual page 31

Note:
Total 5 devices (nodes) can be assigned in total 3 association groups. Below table lists out the devices
(nodes) allocations in the 3 association groups.
Case no. No. of Node ID in
Association Group_1
Case 1
Case 2
Case 3
Case 4
Case 5
Important:
Please do not associate heat pump and compressor devices in same association group because heat
pump and compressor device cannot be turned on simultaneously!
Association groups setting example (case 3):
F‐BW8031 (ZTS‐110)
No. of Node ID in
Association Group_2
4
3
2
1
0
Association group_1
for Heat Pump
Association group_2
for Compressor
Association group_3
for Auto report to gateway
No. of Node ID in
Association Group_3
0 1 (AUTO report)
1 1 (AUTO report)
2 1 (AUTO report)
3 1 (AUTO report)
4 1 (AUTO report)
F‐BW8041 (ZFM‐80)
(Node ID‐A)
F‐BW8041 (ZFM‐80)
(Node ID‐C)
Z‐Wave Gateway
(Node ID‐E)
31
F‐BW8041 (ZFM‐80)
(Node ID‐B)
F‐BW8041 (ZFM‐80)
(Node ID‐D)