Setting Mode - Remotec ZTS-110 Z-Thermostat User Manual

Press "Prog＂ key to confirm it
and back to the Home page.
Note:
If you deactivated the Easy mode, please refer to Setting Mode for the temperature scale
selection.
Setting Mode (set Day, Clock, 12/24 hour, F/C, Swing and Differential)
Symbol
If you deactivated the Easy mode, you can continue to set up Day, Clock, 12/24 hour, F/C, Swing and
Differential. Refer to below for steps:
Step Procedure / Description
Press and hold "Mode" key for 2
seconds to entry the setting mode.
It will display "EASY YES" if it stays
in EASY mode. Otherwise,
1
it will display "EASY no" if EASY
mode is deactivated.
Press Up/Down key to toggle the
Setting Mode Key Description
Increase value / Toggle selection
Decrease value / Toggle selection
Backward to previous setting
Forward to next setting
Confirm and go to next setting
Confirm and go back to Home
LCD indication
13