Section; General Information - Manitowoc S Installation, Use & Care Manual

Model Numbers
This manual covers the following models:
Self-Contained Self-Contained
Air-Cooled Water-Cooled
SD0302A
SY0304A
SD0322A
SY0324A
SR0420A
SD0422A
SY0424A
SD0452A
SY0454A
SR0500A
SD0502A
SY0504A
SD0602A
SY0604A
SR0850A
SD0852A
SY0854A
SD1002A
SY1004A
SD1202A
SY1204A
SD1402A
SY1404A
SR1600A
SD1602A
SY1604A
SR1800A
SD1802A
SY1804A
----
---- SD3303WHP
----
---- SY3305WHP
----
NOTE: Model numbers ending in HP indicate High Pressure water regulating
valve. Standard pressure = 150 psi (10.34 bar) High pressure = 350 psi
(24.13 bar)
!
Remove all ice machine panels before lifting and
installing.
ICE DEFLECTOR
An ice deflector is required when the ice machine is
installed on a bin. An ice deflector is not required when
the ice machine is installed on a dispenser.
4

General Information

Remote
SD0303W ----
SY0305W ----
SD0323W ----
SY0325W ----
SR0421W ----
SD0423W ----
SY0425W ----
SD0453W ----
SY0455W ----
SR0501W SR0590N
SD0503W SD0592N
SY0505W SY0594N
SD0603W SD0692N
SY0605W SY0694N
SR0851W SR0890N
SD0853W SD0892N
SY0855W SY0894N
SD1003W
SD1092N
SY1005W
SY1094N
SD1003WM
SD1203W ---
SY1205W ---
SD1403W
SD1492N
SY1405W
SY1494N
SD1403WM
SR1601W SR1690N
SD1603W SD1692N
SY1605W SY1694N
SR1801W SR1890N
SD1803W SD1892N
SY1805W SY1894N
SD3303W ----
----
SY3305W ----
----
SD3303WM ----
Warning

Section 1

Manitowoc ice machines require a deflector when
installed on an ice storage bin.
Prior to using a non-Manitowoc ice storage system
with Manitowoc
manufacturer to assure their ice deflector is
compatible with Manitowoc ice machines.
Do not operate equipment that has been misused,
abused, neglected, damaged, or altered/modified
from that of original manufactured specifications.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge,
supervision concerning use of the appliance by a
person responsible for their safety.
S3000C ice machines are only approved for use on
Manitowoc B1100-00/B1400-00 bins.
BIN INSTALLATION
• All ice machines installed on a bin require an ice
deflector.
• Manitowoc bins have a deflector installed and require
no modifications when used with a forward facing
evaporator.
• Ice machines with multiple evaporators require a
deflector kit.
DISPENSER INSTALLATION
• No adapter is needed for machines that match the
size of the dispenser unless required by the
dispenser manufacturer.
• No deflector is required unless specified by the
dispenser manufacturer.
• A bin thermostat to control ice level is recommended.
! Warning
ice machines,
! Warning
unless they have
! Warning
Part Number 000006520 11/11
contact the
been given