Emerson FXMP25 User Manual page 43

This parameter can be changed via the field controller keypad or via the comms
interface itself. If it is changed via the comms interface, the response to the command
uses the original baud rate. The master should wait at least 20ms before sending a new
message using the new baud rate.
97
Coding
Range
Update rate
The field controller software version consists of two numbers xx.yy. Where xx specifies
a change that affects hardware compatibility, yy specifies a change that affects product
documentation.
98
Coding
Range
Default
Update rate
If any number other than 0 is programmed into this parameter, user security is applied
so that no parameters can be adjusted. When this parameter is displayed and security
is locked it appears as zero.
99
Coding
Range
Update rate
The power PCB software version consists of two numbers xx.yy. Where xx specifies a
change that affects hardware compatibility, yy specifies a change that affects product
documentation.
FXMP25 User Guide
Issue Number: 3
Software version
Bit FI Txt
1.00 to 99.99
Write at power-up
User security code
Bit FI Txt
0 to 999
0
Background read
Power software version
Bit FI Txt
1.00 to 99.99
Write at power-up
www.controltechniques.com
VM DP ND US
2 1
VM DP ND US
1
VM DP ND US
2 1
RW BU PS
1
RW BU PS
1 1 1
RW BU PS
1
43