IDE HDD Auto Detection
This option detects the hard disk parameters for the hard
disk drives installed in your system. Highlight this option
and press <Enter>. A screen similar to the one below
will appear.
The screen displays the parameters detected and allows
you to accept or reject the parameters. Type "Y" and
press <Enter> to accept the parameters or press <Esc>
to abort. If you select "Y", the parameters of the hard
disk will be displayed in the Standard CMOS Setup.
Save and Exit Setup
When all the changes have been made, highlight "Save &
Exit Setup" and press <Enter>. The message below will
appear:
Save to CMOS and Exit (Y/N)? N
Initial Setup Program u 3-17
G586VPB