Ide Hdd Auto Detection - DFI G586OPA User Manual

G586OPA
Type in the password. You are limited to eight charac-
ters. Type in a password that is eight characters long or
shorter. When done, the message below will appear:
Confirm Password:
You are asked to verify the password. Type in exactly
the same password. If you type in a wrong password,
you will be prompted to enter the correct password
again. Otherwise, enter a new password.
To delete or disable the password function, simply press
<Enter> instead of typing in a new password. Press the
<Esc> key to return to the main menu.
If you forget your password, you should use the Default
Password "AWARD_SW" to clear any previously set
password. Simply type AWARD_SW, press <Enter> and
the password would be disabled.

IDE HDD Auto Detection

This option detects the hard disk parameters for the hard
disk drives installed in your system. Highlight this
option and press <Enter>. A screen similar to the one
shown on the next page will appear.
Initial Setup Program u 3-18