DFI G586VPA User Manual page 45

Step 5
Remove the G586VPB from its original packing box. Be
careful to avoid touching all connectors and pins on the
board. Please refer to the handling instructions on pages
2-1 and 2-2 for proper handling techniques.
Step 6
Insert the HSIM modules into the SIMM banks on the
G586VPB. The quantity and location of the SIM
modules is dependent upon the memory configuration
and type of modules you intend to use.
Step 7
Set the corresponding jumpers.
Step 8
Install the prepared G586VPB system board into the
case and replace the screws.
Step 9
Reinstall all cards and connectors and replace the system
unit cover. Reconnect all power cords and cables.
G586VPB
Installation Overview u 2-35