Exit Without Saving - DFI G586VPA User Manual

Green PCI/ISA System Board
Type "Y" and press <Enter>. The following message
will appear:
Type "Y" and press <Enter>. The modifications you
have made will be written into the CMOS memory, and
the system will reboot. You will once again see the
initial diagnostics on the screen. If you wish to make
additional changes to the setup, press <Ctrl> <Alt>
<Esc> or <Del> after memory testing is done.

Exit Without Saving

When you do not want to save the changes you have
made, highlight this option and press <Enter>. The
message below will appear:
Type "Y" and press <Enter>. The system will reboot
and you will once again see the initial diagnostics on the
screen. If you wish to make any changes to the setup,
press <Ctrl> <Alt> <Esc> or <Del> after memory
testing is done.
3-18 u Initial Setup Program
Reboot System (Y/N)? N
Quit Without Saving (Y/N)? N