Options And Accessories; General; Models; Options - Lakeshore 330 User Manual

Autotuning temperature controller

page of 104

/ 104
Contents
Table of Contents
Bookmarks

Table of Contents

Lake Shore Model 330 Autotuning Temperature Controller User's Manual

6.0

GENERAL

This chapter covers Model 330 Temperature Controller model numbers (Paragraph 6.1), Options (Paragraph

6.2), and Accessories (Paragraph 6.3).

6.1

MODELS

Two Model 330 independent sensor inputs can be variously configured with certain combinations of the

following input types. Users can reconfigure any of the input types except for the optional thermocouple input.

Model

330-11

330-12

330-13

330-22

330-23

330-33

330-41

330-42

330-43

330-44

330-51

330-53

330-55

Use the model numbers above to specify input type (e.g., 330-12 for a Model 330 with one Silicon Diode input

and one Platinum input). The standard 330 heater output is 25 watts. Add a suffix of W50 to the order number

for a unit factory-configured for 50 watts operation, or the user can do so by moving a jumper within the unit.

6.2

OPTIONS

MODEL

NUMBER

8000

Precision Option, Floppy Disk. Consists of breakpoint pairs from a Sensor Precision

Calibration loaded on a floppy disk in ASCII format for Customer downloading.

8001

Precision Option, Factory Installed. Provides custom factory programming of a specific

sensor calibration curve. The Precision Option improves combined sensor/instrument

accuracy to within ±0.1 K or better over the calibrated temperature range of the sensor. Data

is stored in a memory chip (NOVRAM). Requires the use of a calibrated sensor.

8002-05

Precision Option, Field Installation. For field installation of the precision option for Model 330

owners. When ordering, specify your instrument serial number and calibrated sensor model

and serial number. A new NOVRAM will be sent for Customer installation.