Installation; General; Inspection And Unpacking; Repackaging For Shipment - Lakeshore 330 User Manual

Lake Shore Model 330 Autotuning Temperature Controller User's Manual
2.0

GENERAL

This chapter covers general Model 330 installation instructions: Inspection and Unpacking (Paragraph 2.1),
Repackaging for Shipment (Paragraph 2.2), Definition of Rear Panel Connections (Paragraph 2.3), Sensor
Input Settings (Paragraph 2.4), Grounding and Shielding (Paragraph 2.5),. Sensor Installation (Paragraph 2.6),
Sensor Curve Selection (Paragraph 2.7), Precision Calibration Option (Paragraph 2.8), Heater Setup
(Paragraph 2.9), Rack Mounting (Paragraph 2.10), and Power Up (Paragraph 2.11).
2.1

INSPECTION AND UNPACKING

Inspect shipping containers for external damage. Make all claims for damage (apparent or concealed) or
partial loss of shipment in writing to Lake Shore within five (5) days from receipt of goods. If damage or loss is
apparent, please notify the shipping agent immediately.
Open the shipping containers. Use the packing list included with the system to verify receipt of the instrument,
sensor, accessories, and manual. Inspect for damage. Inventory all components supplied before discarding
any shipping materials. If there is freight damage to the instrument, file proper claims promptly with the carrier
and insurance company and notify Lake Shore. Notify Lake Shore immediately of any missing parts. Lake
Shore cannot be responsible for any missing parts unless notified within 60 days of shipment. See the
standard Lake Shore Warranty on the A Page (immediately behind the title page).
2.2

REPACKAGING FOR SHIPMENT

To return the Model 330, sensor, or accessories for repair or replacement, obtain a Return Goods
Authorization (RGA) number from Technical Service in the United States, or from the authorized sales/service
representative from which the product was purchased. Instruments may not be accepted without a RGA
number. When returning an instrument for service, Lake Shore must have the following information before
attempting any repair.
1. Instrument model and serial number.
2. User name, company, address, and phone number.
3. Malfunction symptoms.
4. Description of system.
5. Returned Goods Authorization (RGA) number.
Wrap instrument in a protective bag and use original spacers to protect controls. Repack the system in the
LSCI shipping carton (if available) and seal it with strong paper or nylon tape. Affix shipping labels and
FRAGILE warnings. Write the RGA number on the outside of the shipping container or on the packing slip.

Installation

CHAPTER 2
INSTALLATION
2-1