General; Options And Accessories; Models; Options - Lakeshore 335 User Manual

Chapter 7: Options and

7.1 General

7.2 Models

7.3 Options

7.4 Accessories
Accessories
This chapter provides information on the models, options, and accessories available
for the Model 335 temperature controller.
The list of Model 335 model numbers is provided as follows:
Model
335 Standard temperature controller. two diode/RTD inputs and two control outputs
Power configurations: the instrument is configured at the factory for customer-
selected power as follows:
VAC-100 Instrument configured for 100 VAC with U.S. power cord
VAC-120 Instrument configured for 120 VAC with U.S. power cord
VAC-220 Instrument configured for 220 VAC with universal Euro line cord
VAC-240 Instrument configured for 240 VAC with universal Euroline cord
Instrument configured for 120 VAC with U.S. power cord and universal Euro line cord and fuses
VAC-120-ALL
for 220/240 VAC setting
Other country line cords available, consult Lake Shore
The list of Model 335 options is provided as follows:
Model
3060-H 2-thermocouple input option card. Adds two thermocouple inputs to the Model 335.
Accessories are devices that perform a secondary duty as an aid or refinement to the
primary unit. Refer to the Lake Shore Temperature Measurement and Control Catalog
for details. A list of accessories available for the Model 335 is as follows:
Model
106-009*† Heater output connector (dual banana jack)
G-106-233*† Sensor input mating connector. (6-pin DIN plug); two included
G-106-735*† Terminal block , 8-pin
MAN-335*† Model 335 user manual.
Sensor/heater cable assembly: 10 Feet. Cable assembly for two diode/resistor sensors and
112-177†
2 heater outputs. Approximately 3 m (10 ft) long. Refer to FIGURE 7-1.
Sensor/heater cable assembly : 20 Feet. Cable assembly for two diode/resistor sensors and two
112-178†
heater outputs. Approximately 6 m (20 ft) long. Refer to FIGURE 7-1.
Heater output conditioner. The heater output conditioner is a passive filter that further
3003 reduces the already low heater output noise of the Model 335. Refer to section 7.7 and
see FIGURE 7-3.
6201† 1 m (3.3 ft) long IEEE-488 computer interface cable assembly
CalCurve™, factory installed: the breakpoint table from a calibrated sensor stored
8001-335
in the instrument
CAL-335-CERT† Instrument recalibration with certificate
CAL-335-DATA† Instrument recalibration with certificate and data
Description of Models
TABLE 7-1 Model description
TABLE 7-2 Power configurations
Description of Options
TABLE 7-3 Model description
Description of Accessories
TABLE 7-4 Accessories
7.1 General 127
|
www.lakeshore.com