Table of Contents
Advertisement
SAFETY
INFORMATION
WARNING: Keep flue open
when operating unit.
IMPORTANT: Read this owner's
manual carefully and completely
before
trying
to
operate, or service this log set.
Improper use of this log set can
cause serious injury or death
from
burns,
fire,
electrical
shock,
and
monoxide poisoning.
DANGER: Carbon monoxide
poisoning may lead to death!
Carbon Monoxide Poisoning: Early
signs of carbon monoxide poisoning
resemble the flu with headaches,
dizziness, or nausea. If you have these
signs, the log set may not be working
properly. Get fresh air at once! Have
log set serviced. Some people are
more affected by carbon monoxide
than others. These include pregnant
women, people with heart or lung
disease or anemia, those under the
influence of alcohol, and those at high
altitudes.
Natural Gas: Natural gas is odorless.
An odor-making agent is added to the
gas. The odor helps you detect a gas
leak. However, the odor added to the
gas can fade. Gas may be present
even though no odor exists.
Make certain you read and understand
all warnings. Keep this manual for
reference. It is your guide to safe and
proper operation of this log set.
WARNING: Any change to this
log set or its controls can be
dangerous.
1.This appliance, as supplied, is only for
use with the type of gas indicated on
the rating plate. This appliance is
convertible for use with propane/LP,
using the MANUAL ON/OFF VALVE/
SAFETY PILOT KIT.
2. If you smell gas
¡ ñ
shut off gas supply
¡ ñ
do not try to light any appliance
¡ ñ do not touch any electrical switches;
do not use any phone in your building
¡ ñ
immediately call your gas supplier
from a neighbor's phone. Follow the
gas supplier's instructions
¡ ñ
if you cannot reach your gas supplier,
call the fire department
PRO-COM OWNER'S MANUAL
VENTED GAS LOGS
3. Never install the log set
¡ ñ
in a recreational vehicle
¡ ñ where curtains, furniture, clothing,
or other flammable objects are
less than 42 inches from the front,
top, or sides of the log set
¡ ñ
in high traffic areas
assemble,
¡ ñ
in windy or drafty areas
4.
Before installing in a solid fuel
burning fireplace, the chimney flue and
fire-box must be cleaned of soot,
explosion,
creosote, ashes and loose paint by a
carbon
qualified chimney cleaner. Creosote
will ignite if highly heated. Inspect
chimney flue for damage.
5. You must operate this log set with a
fire-place screen in place. Make sure
fireplace
running log set. If the fireplace has
glass doors, they must remain OPEN
while this log set is in operation.
6. This log set is designed to be smoke-
less. If logs ever appear to smoke, turn
off appliance and call a qualified
service person. Note: During initial
operation, slight smoking could occur
due to log curing and the burning of
manufacturing residues. You may wish
to add more ventilation by opening a
window.
7. To reduce the creation of soot, follow
the instructions in the Cleaning and
Maintenance section, page 6.
8. Do not allow fans to blow directly into
the fireplace. Avoid any drafts that alter
burner flame patterns. Ceiling fans can
create drafts that alter burner flame
patterns. Altered burner patterns can
increase sooting.
9.Do not use a blower insert, heat
exchanger insert, or other accessory
not approved for use with this log set.
10.This log set needs fresh, outside air
ventilation to run properly. See the Air
for Combustion and Ventilation section,
page 3.
11. Do not run log set
¡ ñ
where flammable liquids or
vapors are used or stored
¡ ñ
under dusty conditions
12. Do not burn solid fuel in the fireplace
after installing the log set. Do not use
this log set to cook food or burn paper
or other objects.
13. Log set becomes very hot when in
use. Keep children and adults away
from hot surface to avoid burns or
clothing ignition. Log set will remain hot
for a short time after shut-down. Allow
surface to cool before touching.
14. Carefully supervise young children
when they are in the room with log set.
screen
is
closed
before
2
15. Do not use appliance if any part
has been exposed to or under water.
Immediately call a qualified service
technician
to
inspect
appliance and to replace any part of
the control system (if using control
system) and any gas control which
has been under water.
16. To help prevent breakage, new logs
must be broken-in (see Curing Logs
page 6).
17. Turn log set off and let cool before
servicing, installing, or repairing.
Only a qualified service person
should install, service, or repair log
set.
LOCAL CODES
Install and use log set with care. Follow all
local codes. In the absence of local codes,
use the latest edition of The National Fuel
Gas Code ANS Z223.1, also known as
NFPA 54*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy.MA 02269
UNPACKING
CAUTION:
Do not remove the
metal data plates from the burner pan.
The data plates contain important
product information.
1. Remove logs, hearth kit, pan materials,
and hardware from carton.
2. Remove all protective packaging applied
to logs and base for shipment.
3. Check all items for any shipping damage.
If damaged, promptly inform dealer
where you bought the product.
OPTIONAL PRODUCT
FEATURES
ON/OFF VALV/SAFETY PILOT KIT
AND PROPANE/LP CONVERSION
An optional on/off valve/safety pilot kit with
a piezo ignitor is available for this
appliance.
This
system
matches, batteries, or other sources to
light. You must use this optional system
for LP conversion.
See accessories,
page 6.
the
room
requires
no
WAL21-01
Advertisement
Table of Contents
