Turning The Printer On And Off - Konica Minolta PagePro 1250W. User Manual

Installing and setting up the printer 2

Turning the printer on and off

Note
Improper handling may damage the printer!
- Never turn off the printer while a print job is in progress, the printer is
receiving data from the computer (blinking green "Ready" indicator on
control panel), or the printer is being reset.
Set the power switch to the "I" (ON)
position to turn on the printer.
The printer is ready to use in ap-
proximately 20 seconds. The green
"Ready" indicator should be on (but
not blinking) and the orange "Error"
indicator off.
Set the power switch to the
"O" (OFF) position to turn off the
printer.
Saving energy is sensible!
When the printer has been inactive for 15 minutes, it automatically
switches to the POWER SAVE mode. When the printer receives a new
print job while in POWER SAVE mode, it automatically switches to the
warmup phase and is ready to print within approximately 7 seconds.
2-11