Konica Minolta PagePro 1250W. User Manual page 31

Installing the printer driver
To install the printer driver using the Installer under Windows Me
The CD-ROM that came with your printer starts automatically after being
loaded into the CD-ROM drive of your PC. You are guided step-by-step
through the installation procedure.
1
With Windows running, insert the CD-ROM that came with your printer
into your PC's CD-ROM drive.
The installation program starts automatically.
?
What if the installation program does not start up automatically?
Browse the CD-ROM and double-click "setup.exe" to start the
installation program.
2
Follow the instructions for the installation program.
Once the printer driver has been successfully installed, the
"MINOLTA-QMS PagePro 1250W" printer icon displays in the Printers
dialog box.
3
Remove the CD-ROM from your PC's CD-ROM drive. This completes
the installation of the printer driver.
To install the printer driver using Plug-and-Play under Windows Me
For a simple way of installing the printer driver, we recommend using the
Installer (see the previous section). However, there are other ways of
installing the printer driver without using the installer.
This section describes Plug-and-Play installation with a parallel
connection.
1
After connecting the printer to your PC with the parallel cable, turn on
the printer.
2
Turn on the PC. After Windows starts, the Add New Hardware Wizard
dialog displays.
3
Insert the CD-ROM that came with your printer into your PC's CD-
ROM drive, click the "Specify the location of the driver (Advanced)"
button, and then choose [Next].
4
Choose the "Search for the best driver for your device.
(Recommended)." option button, check the "Specify a location:" box,
and then choose [Browse].
5
Browse the CD-ROM and navigate to "Win9x."
6
Choose [OK], and then choose [Next] twice.
3
3-7