Konica Minolta PagePro 1250W. User Manual page 86

9
Problem
Blank pages
Black pages
Pages are too light
Pages are too dark
9-8
Possible cause
The toner cartridge is empty or
damaged.
The toner cartridge is damaged.
The Toner Save mode has been
activated.
The toner density is not set
correctly in the printer driver.
The toner cartridge may be
running out of toner.
The toner cartridge is damaged.
The toner cartridge is damaged.
The toner density is not set
correctly in the printer driver.
Troubleshooting
Action
Remove the toner cartridge and
check for damage. If necessary,
replace the toner cartridge. (See
page 8-2.)
Remove the toner cartridge and
check for damage. If necessary,
replace the toner cartridge. (See
page 8-2.)
Check the setting in the printer
driver. Change the setting and
try printing again. (See chapter
4.)
Set the toner density to the
desired level and try printing
again. (See chapter 8.)
Remove the toner cartridge and
rock it in order to improve the
distribution of the remaining
toner. If the problem persists,
replace the toner cartridge. (See
chapter 8.)
Remove the toner cartridge and
check it for damage. If
necessary, replace the toner
cartridge. (See chapter 8.)
Remove the toner cartridge and
check it for damage. If
necessary, replace the toner
cartridge. (See chapter 8.)
Set the toner density to the
desired level. (See chapter 4.)