Information On Installation Using "Add Printer; Installing The Usb Device Driver And Printer Driver Under Windows Xp - Konica Minolta PagePro 1250W. User Manual

3

Information on installation using "Add Printer"

We strongly recommend that you install the printer driver using the
Installer ("setup.exe" file). However, if you do install the printer driver using
the Add Printer wizard, note the following points:
The dialog box for installing options is not displayed. Adjust the
additional options after you have completed the installation in the
printer driver.
The Status Display and printer uninstaller utility will not be installed.
A folder for storing the form overlay data is not created.
3.3 Installing the USB device driver and printer driver
under Windows XP
When connecting the printer to your PC with a USB cable, install the USB
device driver according to the following instructions before installing the
printer driver.
If you have connected the printer to your PC with a parallel cable, skip to
the following section, "To install the printer driver using the Installer under
Windows XP," on page 3-3.
To install the USB Device Driver under Windows XP
1
Turn on your PC.
2
Turn on the printer.
3
When Windows and the printer are both ready, insert the CD-ROM
that came with your printer into your PC's CD-ROM drive.
4
Connect the printer to the PC with the USB cable (see chapter 2) to
display the Found New Hardware Wizard dialog box.
5
Choose [Cancel] to close the Found New Hardware Wizard dialog
box.
6
Choose [start], and then choose "My Computer."
7
In the System Tasks list choose "View system information."
8
Choose the "Hardware" tab of the System Properties dialog, and then
choose the [Device Manager...] button.
9
Under "Universal Serial Bus controllers" double-click "USB Printing
Support." The USB Printing Support Properties dialog box displays.
3-2
Installing the printer driver